logo  
 
About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions| Research
 

Actuator Hinge 8.5mm 80 Ohm With Base
0101Image01 0202Image02 0303Image03 0404Image04 0505Image05
plantraco bicha lipo charger




Specifications:

Weight 0.75grams
Height 14.1mm
Width 10.75mm
Resistance 80 Ohm
Coil Diameter 8.5mm
Voltage 0 - 5 Volts
Connector Solder pads
Movement Proportional

This classic inline hinge actuator design has now been improved with the addition of a circuit board and solder points for attaching extension wires. The ends of the coil wires are already pre soldered into the front side of these connection points so all you need to do is solder your extension wires to the back.

Note: Actuators are shown with centering magnets attached for illustration purposes only. The centering magnets are supplied with the actuator but you need to glue them in place yourself. They can be glued in place with a small amount of CA Glue.

A video showing the movement and self centering of the actuator.

Was: $18.50
Now: $8.90
(NEW Lower Price)


All prices in AUD



Related Items
1.27mm Pitch
0.3mm Solder
DelTang Rx Units
magnet wire 44AWG 5Meters
magnet wire 44AWG Roll
actuator convertor Actuator Convertor