logo  
 
About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions| Research
 

Servo 5330 SH
0101Image01 0202Image02 0303Image03 0404Image04 0505Image05
Linear Servo 1.7grams




Specifications:

Type Digital
Torque 0.15Kg/3.7V
0.17Kg/4.2V
Speed 0.06s/60 ° 3.7V
0.04s/60 ° 4.2V
Length 13.5mm
Width 6.2mm
Height 20.0mm
Weight 2.18 grams with lead and plug
Voltage 2.5 - 4.2V

This version is similar to the 5320 servo but comes with a larger motor and therefore has greater torque. The JST SH 1.0mm pitch connector makes it simply plug and play with the following receivers.

This servo is plug and play with the DtRx34 receiver. No swapping of servo wires is required.
To connect this servo to a DtRx33 receiver you will need the adapter listed below. Please note that you will also need to swap the negative and signal wires on the adapter to match the pin order on the receiver.
Adapter JST SH to 1.25mm Molex
To connect this servo to a LM 6CH LGT SH receiver you will need the adapter listed below. Please note that you will also need to swap the negative and signal wires on the adapter to match the pin order on the receiver.
1 Adapter JST SH to 1.25mm Molex



To connect this servo to a LM 6CH LGT Standard JR / Futaba receiver you will need the adapter listed below.
1 Adapter JR Futaba to Molex
   

 

Price: $ 13.90

Purchases above
$30 AUD only

More Info HERE





Related Items
dtrx35d 5320 Servo Mounts
dtrx35d Rx35d
Receiver
y-connector JR/ Molex YConnector
molex y-connector SH to Molex Adapter
Pushrod set Metal Pushrods
Pushrod set Carbon Pushrods
pushrod connector set Pushrod Connector Set
1 Control Linkages
1 Control Linkage Set
Adapter SH to Molex