logo  
 
About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions| Research
 

Servo Set Linear Micro
0101Image01 0202Image02 0303Image03 0404Image04 0505Image05 06Image06
Linear Servo 1.7grams




Specifications:

Type Analog
Application Ultra micro
Connector Molex 1.25mm
Length 20.4mm
Width 14.0mm
Height 10.5mm
Weight 1.96grams
Stroke 8mm
# in pack 2 Servos L/R
Voltage 3.2 - 4.2V

These linear servos are sold in sets of two and have slightly smaller dimensions compared to other linear servos making them particularly useful in tight fit-outs. This reduction in width is achieved by placing just two mounting holes both on the same side of the servo board. The servo arms have 0.5mm holes for control linkages to clip straight in. These holes are smaller than some other linear servos and therefore will have less play when using control linkages which are typically made from wire with a diameter of 0.3 to 0.5mm.

This servo is plug and play with the DtRx34 receiver. However, the negative and signal wires need to be swapped on the servo plug to mach the receiver.

This servo is plug and play with the DtRx33 receiver as long as you use the adapter below. The wire colour on the servo and adapter won't match but the polarity at the receiver will match the servo.
Adapter JST SH to 1.25mm Molex

This servo is plug and play with the LM 6CH LGT SH receiver as long as you use the adapter below. The wire colour on the servo and adapter won't match but the polarity at the receiver will match the servo.
1 Adapter JST SH to 1.25mm Molex
   

 

Price: $29.50
(set of two)

All prices in AUD
MicronWings is an
Australian business




Related Items
dtrx35d Rx34d
Receiver
Rx33d
Receiver
LM 6Ch SH
Receiver
Adapter JST SH to Molex
connectors Adapter JR Futaba to Molex
Control Linkages
Control Linkages
Control Linkages