About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions|

Actuator White 45 Ohm With Base Mount
0101Image01 0202Image02 0303Image03 0404Image04 0505Image05 0606Image06
plantraco bicha lipo charger


Weight 0.44grams
Height 10.3mm
Width 6.4mm
Mount width 11.2mm
Resistance 45 Ohm
Voltage 0 - 5 Volts
Movement Proportional

This actuator is designed to mount through a profile airframe and attach to a pushrod. The ends of the coil wires are already tinned so all you need to do is solder your extension . The mounting screw holes are 0.9mm in diameter and the best screws to use are M1.0 (1mm) screws (available from the fasteners section).

Note: Actuators are shown with centering magnets attached for illustration purposes only. The centering magnets are supplied with the actuator but you need to glue them in place yourself. They can be glued in place with a small amount of CA Glue.



Related Items
1 1.27mm Pitch
1 0.3mm Solder
magnet wire 44AWG 5Meters
magnet wire 44AWG Roll
actuator wires Extension Wires