This adapter can be used to connect micro servos which have Molex connectors to a receiver which has JST SH sockets to run dual ailerons.
The receivers below can be used with this connector. Please see the notes pertaining to each.
DelTang Rx33 With JST SH Sockets
Polarity: Negative and signal wire must be swapped on adapter plug.
Receiver LM 6ch LGT with JST SH Sockets
Polarity: Negative and signal wire must be swapped on the servo plug
When using this Y-connector with any of the servos below, the wires will be in the correct order.
5320 Black Molex
5320 White Molex
When using this Y-connector with any of the servos below, some or all of the the wires may not be in the correct order. Check your receiver pin order and reverse the wires on the servo plug if necessary.
2 Gram Black Molex
Related Videos
Removing and replacing wires from micro RC connectors.