About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions|

DT Rx35d Receiver Unit for Servos with ZH Connectors
0101Image01 0202Image02 0303Image03 0404Image04 0505Image05
DelTang dtrx35 micro receiver


Product Name DTRx35d
Voltage 3 - 10volts
Weight 0.75 grams
Length 17mm
Width 12mm
Height 6mm
Type Servo
Connector JST ZH
Channels 4 - 6
Onboard ESC Brushed
External ESC Capable
ESC Type Dual


Please Note: DelTang receivers may be in short supply. If the receiver you want is out of stock you can contact us by email to be notified when it is back in stock.

The Rx35d is an updated version of the standard 35 now with dual ESC capability and differential steering. The 4 channel receiver unit for use with micro servos like the BioMetal or Linear servos. It has JST ZH connectors onboard so you can simply plug in and swap servos as needed.

This is a DSM2 compatible receiver unit which can be bound to a Spektrum DSM2 capable transmitter or any other transmitter which is DSM2 capable. It also has a 2 Amp brushed ESC onboard.

The 4 channels with ZH connectors are for Throttle, Aileron, Elevator and Rudder. additional channels for Gear and Aux signals can be soldered direct to pads on the underneath of the circuit board. If you are using an external ESC, you can connect it to the Throttle ZH connector.

MicronWings recommends this unit for builders who want to get up and running quickly. There is limited or no soldering to do on the circuit board itself except for soldering your wiring configuration.

DTRx35 The DTRx35 used in our FireFly build thread. In this project we used the DtRx35 receiver with a 5Amp ESC unit to power an AP-03 motor. The servos used were the HK5320 servos.
Build Thread Link



Price: $79.00


Related Items
01 Biometal
01 5320 White
(with rewiring)
3A ESC 4A 1S ESC Brushed
3A ESC 3A 1S ESC Brushed
01 AP03 ESC