About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions|

Motor D1103 10000kv Brushless
0101Image01 0202Image02 0303Image03 0404Image04 0505Image05 0606Image06


Length 16.2mm
Can Diameter 13.7mm
Weight 3.5 grams
KV 11,000kv
Shaft 1.5mm
Voltage 1S 3.7V
Lead length 60mm
1 x Motor
1 x Motor mount
4 x Motor mount screws
4 x Mounting screws

This motor provides a very good thrust to weight ratio. It is rated for 1S (3.7 volts) only and supplied with the motor mount detached. You will need a fine tip screwdriver for the screws that attach the mount.

MicronWings Test Data
Prop   Thrust ESC Volts
GWS 2510 EP 36 grams 3A 1S ESC 4.0 Volts
GWS 3020 EP 37 grams 3A 1S ESC 4.0 Volts
90mm EP 35 grams 3A 1S ESC 4.0 Volts
80mm White Prop 34 grams 3A 1S ESC 4.0 Volts

When using the three props shown below with this motor,
you will need to drill out the prop bore to 1.4mm.

Propeller Adapters 1.5mm
These prop adapters have a 1.5mm bore and are suitable for the GWS 4025 prop. Use these adapters for smoother operation in situations where prop strike is not likely.
Prop Saver 1.5mm Alloy
This prop saver is suitable for use with the GWS 4025 prop and will guard against damage in the case of prop strike. Prop balance may not be as accurate with a prop saver compared to a prop adapter.


Price: $29.00


Related Items
1 2510 prop
1 3020 prop
80mm White Prop
90mm Prop
1.5mm bore
90mm Prop
4mm bore
5043 prop
6030 carbon 1.5mm Adapter
ESC Micro 3A ESC
motor spacers Mount Spacers