About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions|

Prop Saver For 0.8mm Shaft
0101Image01 0202Image02 0303Image03 0404Image04 0505Image05 0606Image06


Weight 0.63g
Shaft Bore 0.8mm
Front Collet 1.97mm
Rear Collets 3.97 mm
Hub Diameter 5.2mm

A prop saver and adapter for motors with a 0.8mm shaft. This prop saver can be used with props which have a bore of 2mm or 4mm. When reversed as shown in the image above with the prop attached the 4mm diameter collet can be used to mount GWS props which have a 4mm bore. This brass design is not only strong but also allows the machine screws to remain tight and not be as likely to loosen over time.

Price: $6.80


Related Items
o-rings 10mm O-Rings
o-rings O-Rings
7mm motor sets GWS 4025
7mm motor sets GWS 4040
7mm motor sets GWS 4530
7mm motor sets GWS 4540
7mm motor sets GWS 5030
7mm motor sets GWS 5043
4mm Geardrive
Gearbox AEO6