About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions|

Receiver 3 Ch Lightweight Brick Style DSMX DSM2
0101Image01 0202Image02 0303Image03 0404Image04 0505Image05 0606Image06
lemon 7ch receiver


Modulation DSMX/2
Channels 3
Length 20.5mm
Width 25.5mm
Height 6.5mm
Weight 2.8 grams
Connector Molex 2P
ESC Type Brushed
ESC Rating 3 Amps

At just 2.8 grams, this is the lightest brick style receiver available. It has an on-board 3 amp brushed ESC via two solder pads underneath the board. The unit come pre-soldered with a Molex 2P battery connector. However you will need to solder the motor wires direct to the receiver yourself. A soldering iron with a fine (needle) tip is required.

Motor Connection.

Example Setup

Binding Process
1. Turn the transmitter off (or ensure the transmitter isn’t in bind mode).
2. Supply power to the receiver.
3. Wait till the light on the receiver flashes rapidly.
4. Turn on or put your transmitter into bind mode.
5. The light on the reveiver comes on solid when bound.

Price: $79.80

All prices in AUD
MicronWings is an
Australian business

Related Items
molex Nanotech 150mah
100mah Lipo Cells
Brushed Motors
1.27mm Connector