About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions|

Receiver LM 6ch LGT DSM2 Compatable with JST ZH
0101Image01 0202Image02 0303Image03 0404Image04
AEO GPS-6 6mm Geardrive Gearbox


Modulation DSM2
Band 2.4GHz
Weight 1.98 grams
Length 26mm
Width 19mm
Height 7.3mm
Voltage 3.45-10.2 V
Type Servo
Connector JST ZH
Channels 6
Onboard ESC None
External ESC Capable

Manual Downlaod

This is a great light weight receiver at just 1.98 grams and full range as well. The connectors are JST ZH connectors making this a perfect unit for running BlueArrow servos which have the same connector. It also has a handy bind button instead of a bund plug, which makes binding a snap.
Please note, you’ll need an external brushed or brushless ESC as this unit does not have an ESC onboard.

This receiver has JST ZH connectors and is plug and play with BlueArrow servos



Wiring - As shown at the back of the receiver

1) Press and hold the button at the edge of the receiver.
2) Power on the receiver.
3) Turn on the transmitter in binding mode.
4) When solid LED light appears on the receiver, binding is completed.
Turn off the receiver and perform flight check prior to flying.

Shown below is the correct wiring. Note the order of the wires for servo on the right. On the left a JST ZH plug has been used to supply power to the unit through the Aux port. The signal wire has been removed from the plug.

1The ESC Brushed Micro 1S3A can be used to run a brushed motor with this receiver. (Link)




Price: $29.50


Related Items
velcro dots Velcro Dots
servo to actuator converter BlueArrow D03010
1 BlueArrow D03013
BlueArrow S02511
1 BlueArrow S02515
01 Biometal
jst sh extension JST ZH Connectors
3A ESC 3A 1S ESC Brushed
JST SH Connectors Brushless ESC 3A
1 Brushless ESC 7A