About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions|

Receiver MA-RX42-F2+ FrSky D16 Telem Brushed 5A ESC
0101Image01 0202Image02 0303Image03
lemon 7ch receiver


Modulation FRSky D16
Length 18.5mm
Width 12mm
Height 6.8mm
Weight 1.0 grams
Connector JST SH
ESC 5 Amp
Voltage 1S - 3.0-5.0
Channels 4

This receiver is designed for 1S (3.7 volt) operation. It has an on-board 5Amp 1S brushed ESC. As this receiver also features a CH1 (throttle) port, it also allows for an external brushless ESC to be connected if desired.

This D16 version supports telemetry and can be used with any FRSky transmitter which supports the D16 protocol. The latest transmitters from FRSky which use the ACCESS protocol can also bind to this receiver under D16 mode.

No Dual Aileron Mode
This receiver does not support dual aileron functionality. The bridge marked "P" on the under side of the board is not implemented in the firmware for this receiver because no Aux port is available for dual aileron functionality.

Connect the battery to the receiver and after 15 seconds the LED will blink fast. Then turn on your transmitter and put it into bind mode to complete the bind process.

Telemetry Function
This receiver is capable of sending back telemetry information to the transmitter. Signal Strength (RSSI), Battery Voltage (being supplied to the receiver) and Temperature Data can be sent back. Please note that typically telemetry reception distance is not as great as the receiver’s maximum range distance.

Price: $34.50


Related Items
Servo Bearings
01 Servo LSM 1300S
Servo LSM 1800S
5320 servo 5320 Black SH Servo
5320 servo 5320 Black Long Line
5330 servo 5330 Black SH Servo
5320 White SH Servo
5330 servo 5330 White SH Servo
micro servo Servo 2 gram black