logo  
 
About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions|
 

Receiver MA-RX42E-F2+ FrSky D16 Telem Brushless 5A ESC
0101Image01 0202Image02 0303Image03 0404Image04 0505Image05
lemon 7ch receiver




Specifications:

Modulation FRSky D16
Length 22.5mm
Width 11.8mm
Height 6.6mm
Weight 1.2 grams
Connector JST SH
ESC 5 Amp 1S
Voltage 1S - 3.3-4.2
Channels 5

This receiver is designed for 1S (3.7 volt) operation. It has an on-board 5Amp 1S brushless ESC and SMD holes in the board large anough to accept either of the two included connectors. Alternatively, motor wires can be soldered directory to the board.

This D16 version supports telemetry and can be used with any FRSky transmitter which supports the D16 protocol. The latest transmitters from FRSky which use the ACCESS protocol can also bind to this receiver under D16 mode.

Dual Aileron Mode
By bridging the pads underneath the board marked “P” the CH5 port will function as the second reversed aileron port making dual aileron setup very easy with no transmitter programming necessary.

Binding
Connect the battery to the receiver and after 15 seconds the LED will blink fast. Then turn on your transmitter and put it into bind mode to complete the bind process.

Telemetry Function
This receiver is capable of sending back telemetry information to the transmitter. Signal Strength (RSSI), Battery Voltage (being supplied to the receiver) and Temperature Data can be sent back. Please note that typically telemetry reception distance is not as great as the receiver’s maximum range distance.




Price: $42.60


Or
.





Related Items
Servo Bearings
01 Servo LSM 1300S
Servo LSM 1800S
5320 servo 5320 Black SH Servo
5320 servo 5320 Black Long Line
5330 servo 5330 Black SH Servo
5320 White SH Servo
5330 servo 5330 White SH Servo
micro servo Servo 2 gram black
D0703 Motor
D1103 Motor
AP02 Brushless
ap03 motor

AP03
Brushless

ap05 motor AP05
Brushless