About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions|

Receiver Origin Mi-RX32M
0101Image01 0202Image02 0303Image03 0404Image04 0505Image05
lemon 7ch receiver


Brand Origin RC
Compatibility DSM2
Onboard ESC Brushed
ESC Rating 2 Amps
Length 15.2mm
Width 11.8mm
Height 1.6mm
Voltage 3.3 - 4.2v
Weight 0.35 grams

manual Manual

The MI-Rx32M is a DSM2 Compatible 4 channel micro receiver for actuators. It’s very light and you have the option of soldering direct to the board or soldering 1.27mm pitch connectors to make the unit easily plug n play. The receiver has a 2 Amp onboard brushed ESC as well as a signal pad for use with an external brushless ESC board.

Note that while this is a 4ch receiver you can only set it up for 3 channels in either of the configurations below.
1. Throttle, Elevator and Rudder
2. Throttle, Elevator and Aileron
* The rudder and aileron can be swapped by programming - Please see manual for instructions.

The unit can also be programmed for V-Tail mixing on the elevator and rudder / aileron channels. Plese see the instruction manal for details.

Maximum actuator circuit load: 400ma
Actuator driving frequency: 7.8kHz

By soldering 1.27mm pitch nano connectors to the pads you can make this board plug n play as shown below. The weight with 4 connectors soldered is 0.57grams.

Suggested wiring configurations are shown below for brushed and brushless setups.

* See manual for more information

Motor wire is just 0.35mm in diameter and wire core is the perfect size for the pos and neg holes in the pads on this receiver.
Product Link
motor wire
Motor Wire Set


Price: $45.50


Related Items
motor wire Motor Wire 0.35mm
velcro dots Velcro Dots
Molex picoblade Battery Leads
Molex picoblade Battery Extensions
1 ESC Micro 3A
Actuator Dual Arm
Actuator 100Ohm
Actuator Rocker
actuator Base Mount
emax ES9251 Nano Connectors