Micron Wings

Control Horns, Hinges and Linkages

Control Horns

	Fiberboard Control Mounts Material: 0.2mm Fiberboard (more info)
	Fiberboard Control Horns Material: 0.2mm Fiberboard (more info)
	Wooden Horn Set (thin) Length: 10mm Height: 13mm Material: Plywood - 0.85mm (more info)
	Wooden Horn Set (thick) Length: 10.5mm Height: 16.5mm Material: Plywood- 1.3mm (more info)
	Control Horns Set Micro Length: 9mm Height: 10.5mm Material: Nylon (more info)
	Micro Plastic Horns - one pin Very light weight and strong. These horns have a 0.7mm hole for pushrods made from piano wire. (more info)
	Micro Horns - two pin One of the lightest plastic horns. This horn features a base which presses on withut the need for gluing. (more info)

Clevis

Micro For 1mm Rod
These clevis have a hole for a 1mm pushrod. perfect for light weight carbon pushrod systems.
(more info)

Micro Clevis 15mm
Small and with a shaft bore of just 0.7mm, These clevis are suitable for carbon pushrods.
(more info)

Hinges

Light weight plastic hinge
very light and easy to install
(more info)

	Fiber Hinges Micro Pack of 60 Hinges Surface mount or cut into surface (more info)
	Fiber Hinges Standard Pack of 36 Hinges Surface mount or cut into surface (more info)
	Adhesive Tape Hinges Pack of 120 Strips Peel and Stick (more info)

Linkages and Pushrod Sets

	Control Linkages Z Links Length: 20mm Diameter: 0.5mm Packs of 20 (more info)
	Control Linkages Set Large For use with 0.5 - 0.8mm carbon 0.4mm spring wire 4 Sets / pack (more info)
	Control Linkages Set (Coil) For use with 0.5 - 0.8mm carbon 0.3mm spring wire 8 Sets / pack (more info)
	Micro Control Linkages With an adjustable U bend and included heat shrink. These adapters are perfect for use with 0.25mm or 0.5mm carbon rods. (more info)
	Control Linkages Clip On Clip on linkages for easy attachment and removal. (more info)
	Pushrod Guides 0.3mm Suitable for: 0.25mm - 0.4mm Rods length: 1 Meter (more info)
	Pushrod Guides 0.4mm Suitable for: 0.4mm - 0.5mm Rods length: 1 Meter (more info)
	Pushrod Guides 0.6mm Suitable for: 0.6mm - 0.7mm Rods length: 1 Meter (more info)
	Pushrod Guides 0.8mm Suitable for: 0.8mm - 0.9mm Rods length: 1 Meter (more info)
	Pushrod Connector Set For up to 1.1mm Pushrods Set of 6 connectors (more info)
	Pushrod Set 1mm x 100mm Carbon Pushrods Complete with 1mm clevis Two units in set (more info)
	Pushrod Set 1mm x 200mm Carbon Pushrods Complete with 1mm clevis Two units in set (more info)
	Pushrod Set 1mm x 300mm Carbon Pushrods Complete with 1mm clevis Two units in set (more info)
	Pushrod Set 1mm x 400mm Carbon Pushrods Complete with 1mm clevis Two units in set (more info)
	Pushrod Set 1mm x 60mm Complete with 1mm clevis Two units in set 1mm Spring steel (more info)
	Pushrod Set 1mm x 100mm Complete with 1mm clevis Two units in set 1mm Spring steel (more info)
	Pushrod Set 1mm x 200mm Complete with 1mm clevis Two units in set 1mm Spring steel (more info)
	Pushrod Set 1mm x 300mm Complete with 1mm clevis Two units in set 1mm Spring steel (more info)