logo  
 
About | Contact |Postage |Payment Options | Newsletter| Terms and Conditions|
 

Bearings, Gears, Bushes, Shafts, Keepers, Washers

For all your DIY geardrive projects, these products will give you the creative edge!

Micro Bearings
1

1mm x 3mm x 1mm Bearing
General Grade
RPM: < 1,000

Tolerances: ± 0.05mm
Material: Hardened Bearing Steel
(more info)

1

1mm x 3mm x 1mm Bearing
High Grade
RPM: Up to 6,000

Tolerances: ± 0.005mm
Material: Hardened Bearing Steel
(more info)

1.4mm x 4mm x 2mm
This bearing is well suited for 1.5mm motor shafts.
(more info)
1.5mm x 4mm x 1.2mm
This bearing is well suited for 1.5mm motor shafts.
(more info)
1 2mm x 5mm x 2.5mm
This bearing has a larger 2mm bore for larger motor shafts. Fully enclosed for sound performance.
(more info)

Shafts
01 Gearbox Shafts Pins
Diameter: 0.76mm
Length: 10mm
(more info)
01 0.97mm x 20mm Shafts
Diameter: 0.97mm
Length: 20mm
(more info)
01 0.97mm x 38mm Shafts
Diameter: 0.97mm
Length: 38mm
(more info)
01 0.97mm x 50mm Shafts
Diameter: 0.97mm
Length: 50mm
(more info)
01 0.97mm Diameter SS Shaft
(with burred end)

A stainless steel shaft to fit a variety of gears and props.
(more info)
01 0.97mm Diameter SS Shaft
(with brass keeper)

A stainless steel shaft with a brass keeper attached.
(more info)
01 0.97mm Diameter SS Shaft
(with retainer groove)

A stainless steel 25mm shaft with retainer groove to fit a retainer clip.
(more info)
01 0.97mm Diameter SS Shaft
(with retainer groove)

A stainless steel 35mm shaft with retainer groove to fit a retainer clip.
(more info)
retainer ring 3 x 1 x 0.3mm Retainer
E-Type retainer with a 1mm internal gap. .
(more info)
01 1.0mm x 78mm SS Shaft
Long shaftes with burred sections on each end.
Diameter: 1.0mm
Length: 78mm
(more info)
shaft caps 1mm Shaft Caps
Bore: 0.95mm
(more info)
1.5mm Shaft Caps
Bore: 1.5mm
(more info)

Keepers and Washers

nylon thrust washer Teflon - 0.7x2.2x0.25
Bore: 0.7mm
Outside Diameter: 2.2mm
Thickness: 0.25mm
(more info)
nylon thrust washer Teflon - 0.95x3.25x0.4
Bore: 0.95mm
Outside Diameter: 3.35mm
Thickness: 0.4mm
(more info)
Washer 1.1x2.3 x 0.3mm
Micro washers for use in geardrives and for motor mounts. Perfect for 1mm shafts.
(more info)
QuickLock 1.95 - 2.10mm
Spring keeper for geardrive shafts
(more info)

Bushes / Bearings
brass bearing Brass Bearings 0.78mm
Bore: 0.78mm
Diameter: 1.8mm
Length: 1.9mm

(more info)
brass bearing Brass Bearings 0.97mm
Bore: 0.97mm
Diameter: 1.8mm
Length: 1.9mm

(more info)
brass bearing Brass Bearings 1mm
Micro bearing for 1.0mm shaft with flange. replacement part for 7mm gearboxes.

(more info)

Adapters / Translaters

prop adapter Prop Adapters M0.2
Modulus: M0.2
For M0.2 12 tooth gears


(more info)
prop adapter Prop Adapters M0.3
Modulus: M0.3
For M0.3 12 tooth gears


(more info)
prop adapter GB06 Gearbox Adapters
For 6mm Motors
Build your own gearbox


(more info)
prop adapter 4mm Gearbox Translator
For 4mm Motors
Build your own gearbox


(more info)
prop adapter 6mm Gearbox Translator
For 6mm Motors
Build your own gearbox


(more info)
   
   
   
   

 

 

 

Mod 0.2 Gears and Pinions

01 Mod 0.2 - 8 teeth
0.68 mm Bore
(NEW Lower Price)
(more info)
gear m0.2 Mod 0.2 - 9 teeth
0.78 mm Bore
(NEW Lower Price)
(more info)
gear m0.2 Mod 0.2 - 10 teeth
0.78 mm Bore
(more info)
   
1 Mod 0.2 - 36 teeth
0.78 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.2 - 12 / 40 teeth
Pinion: 12 teeth
Spur: 40 teeth
Bore: 0.78 mm


(more info)
1 Mod 0.2 - 45 teeth
0.95 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.2 - 12 / 60 teeth
Pinion: 12 teeth
Spur: 60 teeth
Bore: 0.78 mm


(more info)
1 Mod 0.2 - 12 / 90 teeth
Pinion: 12 teeth
Spur: 90 teeth
Bore: 0.78 mm


(more info)

Mod 0.3 Gears and Pinions

1 Mod 0.3 - 7 teeth
0.7 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.3 - 7 teeth Meduim
0.7 mm Bore

(more info)
1 Mod 0.3 - 7 teeth Long
0.7 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.3 - 8 teeth
0.75 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.3 - 8 teeth
0.95 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.3 - 9 teeth
0.98 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.3 - 9 teeth
0.68mm bore


(more info)
1 Mod 0.3 - 9 teeth
0.85mm bore


(more info)
1 Mod 0.3 - 9 teeth
0.95mm bore


(more info)
1 Mod 0.3 - 10 teeth
0.8mm bore


(more info)
1 Mod 0.3 - 10 teeth
0.95 mm Bore
(NEW Lower Price)
(more info)
1 Gear Mod 0.3 - 11 teeth
0.9mm bore


(more info)
Gear Mod 0.3 - 13 teeth
0.95mm bore


(more info)
1 Gear Mod 0.3 - 12 teeth
0.95mm bore

(NEW Lower Price)
(more info)
1 Mod 0.3 - 8 / 21 Tooth
1.0 mm Bore

(more info)
1 Mod 0.3 - 28 teeth
0.95 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.3 - 32 teeth
1.45 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.3 - 35 teeth
0.95 mm Bore
(NEW Lower Price)
(more info)
Gear Mod 0.3 - 12/36 teeth
Teeth - 12 / 36
Bore: 0.69mm


(more info)
Gear Mod 0.3 - 12/36 teeth
0.98mm bore

(NEW Lower Price)
(more info)
1 Mod 0.3 - 40 teeth
1.1 mm Bore

(more info)
1 Mod 0.3 - 48 teeth
0.95 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.2 - 12 / 48 SP teeth
Pinion: 12 teeth
Spur: 48 teeth
Bore: 0.76 mm


(more info)
1 Mod 0.2 - 12 / 60 L teeth
Pinion: 12 teeth
Spur: 60 teeth
Bore: 0.78 mm


(more info)
1 Mod 0.3 - 70 teeth
0.95 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.3 - 70 teeth
0.97 mm Bore
(NEW Lower Price)
(more info)
1 Mod 0.2 - 12 / 81 L teeth
Pinion: 12 teeth
Spur: 81 teeth
Bore: 0.78 mm


(more info)

Special Gears and Pinions

   
1 Gear Mod 0.3 - Worm
0.85mm bore

(NEW Lower Price)
(more info)
1 Gear Mod 0.3 - Worm Small
0.65mm bore

(NEW Lower Price)
(more info)
   
 

 

space