Actuator Dual Arm 100 Ohm


11.90 AUD

9 in stock

Category Tag


Weight 0.47grams
Arm Width 13.0mm
Coil Diameter 6.3mm
Coil Height 4.0mm
Resistance 100 Ohm
Wire Length 55mm
Connector None

This actuator is designed to be used for the ailerons on nano size planes. It mounts embedded in the vertical body former section with one arm protruding either side. The base plate mounting holes are 0.9mm in diameter and the holes in the arms for attaching the clevis or Z bend connectors are 0.5mm in diameter.

Note: The centering magnets (not shown in the images) are supplied with the actuator but you need to glue them in place yourself. They can be glued in place with a small amount of CA Glue.