Specifications:
Weight | 0.44grams |
Height | 10.3mm |
Width | 6.4mm |
Mount width | 11.2mm |
Resistance | 45 Ohm |
Voltage | 0 – 5 Volts |
Movement | Proportional |
This actuator is designed to mount through a profile airframe and attach to a pushrod. The ends of the coil wires are already tinned so all you need to do is solder your extension . The mounting screw holes are 0.9mm in diameter and the best screws to use are M1.0 (1mm) screws (available from the fasteners section).
Note: Actuators are shown with centering magnets attached for illustration purposes only. The centering magnets are supplied with the actuator but you need to glue them in place yourself. They can be glued in place with a small amount of CA Glue.