Receiver MiRX32M-S Futaba for Actuators


53.00 AUD

3 in stock

Categories ,

Bind Instructions:
1. Power on the receiver and wait for 15 seconds – the LED will flash slowly.
2. The LED will then start flashing fast
3. Activate the bind mode on your transmitter to bind to the receiver.
4. When bound the LED will change to being solid on.

Note: After binding, disconnect the battery from the receiver and power on again.

Safe Mode: This receiver has a safety mode. If it is powered on with the throttle raised the motor will not arm. To arm the motor you must lower the throttle to zero for 2 seconds. Whan you do this the LED on the receiver will dim and then come bright again to indicate that the motor is now armed.