Servo BlueArrow D03010


17.90 AUD

19 in stock


Type Digital
Voltage 3.3 – 4.2V
Weight 3.1grams
Speed (3.3v) 0.11 sec
Speed (4.2v) 0.08 sec
Length 19.7mm
Width 8.0mm
Height 22.0mm

The BlueArrow D03010 is a high quality digital servo. It is intended for use on 1S systems and runs at 3.3 – 4.2 volts. The connector is a JST ZH 1.5mm pitch.

Key Features

Control System: PWM Pulse Width Control
Processor: Digital IC
Required Pulse: 3 to 5 V Peak to Peak Square Wave
Working frequence: 1500 μs /333 Hz
Rotation angle sensor: Precision Potentiometer
Rotation: Left Rotation: 45°, Right Rotation: 45°
Voltage: 3.3V to 4.2V
Temperature Range: -20℃ to 60℃
Driver Type: MOSFET
Operating Angle: 45 Deg. one side pulse traveling 400μs
Direction: Clockwise/Pulse Traveling 900μs-2100μs
Pulse Width Scope: 900-2100μs
Neutral pulse: 1500μs
Speed:(No-load ): 0.11sec/ 60° @ 3.3V
0.08sec/ 60° @ 4.2V
Torque:(Stall Full load): 0.35 kg . cm @ 3.3V
0.42 kg . cm @ 4.2V
Idle Current: 0.05 A/ 3.3V 0.05 A/ 4.2V
Running Current: 0.09 A/ 3.3V 0.09 A/ 4.2V
Stall Current: 0.50 A/ 3.3V 0.50 A/ 4.2V
Motor Type: Coreless Motor
Bearings: None
Bearing Type:
Gear Material: Aviation duralumin alloy+POM
Servo case: ABS
Plug: JST 1.50
Connector Wire Length: 80.00 mm
Connector Wire SPEC: OD0.8mm/16 x 0.08mm 3p x 160mm “J” type
Weight: 3.10 g
Dimensions (L x W x H): 19.60*8.00*16.30 mm