Servo BlueArrow S02512
Price:
13.20 AUD
7 in stock
Specifications:
| Type | Analogue |
| Voltage | 4.8 – 6.0V |
| Weight | 3.5grams |
| Speed (4.8v) | 0.11 sec |
| Speed (6.0v) | 0.09 sec |
| Length | 19.7mm |
| Width | 8.0mm |
| Height | 22.0mm |
The BlueArrow D02512 is a Well constructed and strong high quality analogue servo for use with standard receivers running at 4.8 – 6.0 volts. The connector is a JST SH.
Key Features
| Control System: | PWM Pulse Width Control |
| Processor: | Analog IC |
| Required Pulse: | 3 to 5 V Peak to Peak Square Wave |
| Working frequence: | 1500 μs /50 Hz |
| Rotation angle sensor: | Precision Potentiometer |
| Rotation: | Left Rotation: 45°, Right Rotation: 45° |
| Voltage: | 4.8V to 6.0V |
| Temperature Range: | -20℃ to 60℃ |
| Driver Type: | MOSFET |
| Operating Angle: | 45 Deg. one side pulse traveling 400μs |
| Direction: | Clockwise/Pulse Traveling 900μs-2100μs |
| Pulse Width Scope: | 900-2100μs |
| Neutral pulse: | 1500μs |
| Speed:(No-load ): | 0.11sec/ 60° @ 4.8V |
| 0.09sec/ 60° @ 6.0V | |
| Torque:(Stall Full load): | 0.40 kg . cm @ 4.8V |
| 0.50 kg . cm @ 6.0V | |
| Idle Current: | 0.05 A/ 4.8V 0.05 A/ 6.0V |
| Running Current: | 0.09 A/ 4.8V 0.09 A/ 6.0V |
| Stall Current: | 0.50 A/ 4.8V 0.50 A/ 6.0V |
| Motor Type: | Coreless Motor |
| Bearings: | None |
| Bearing Type: | |
| Gear Material: | Aviation duralumin alloy+POM |
| Servo case: | ABS |
| Plug: | “J” type |
| Connector Wire Length: | 80.00 mm |
| Connector Wire SPEC: | OD0.8mm/16 x 0.08mm JR80 |
| Weight: | 3.50 g |
| Dimensions (L x W x H): | 19.60*8.00*16.30 mm |
This servo is plug and play with the LM 6ch SH Receiver |
