Charger Lipo 300Mah Variable USB

Specifications:

This variable charger can be set to charge at the following mah rates by adjusting the two micro switches. The LED glows red while it is charging and then turns off when the battery is fully charged. The smaller connector it the common Molex 1.25mm and the larger one is a JST PH 2.0 (MCPX) connector. You can’t charge simultaneously.

Charge rates which can be set with the switches as shown below.
The red light is on constantly while charging and goes out when the battery is fully charged.

	20 – 70 Mah Number 1 switch ON and Number 2 switch OFF
	80 – 160 Mah Number 1 switch OFF and Number 2 switch ON
	170 – 300 Mah Number 1 switch ON and Number 2 switch ON

NOTE: Never leave charging batteries unattended.