Motor Mount Adapter 9mm and 12mm Right Angle

This motor mount can be used to mount drone motors on airplanes. Drone motors have screws which screw in from the back and the mount doesn’t clear the bell. So this mount kit allows you to secure the motor to the airframe while keeping the motor securing screws at the back accessible.

Smaller drone motors come with 6.6mm, 9x9mm and 12x12mm mount patterns and this moutn kit allows you to mount motors with the following mountpatterns
6.6mm (triangle pattern)
8.5×8.5mm
9x9mm
2x12mm
You may wish to see the range of smaller drone motors on the CubeFPV website

Printed from high strength carbon infused TPU.
The cross-sectional holes running through the mount also allow you to mount using 1mm carbon rods if needed.

Example of mounting a motor which has a 6.6mm triangle mount pattern.

Example of mounting a motor which has a 9x9mm triangle mount pattern.

Example of mounting a motor which has a 12x12mm triangle mount pattern.

The mount can be flipped to use the various mount patterns.

Top View

Side View