Adapter Molex to JST SH Y-Connector

Price: 

7.90 AUD

14 in stock

Specifications:

Weight 1.1g
Length 100mm
Plug Molex
Sockets JST SH

This adapter can be used to connect servos which have JST SH connectors to a micro receiver which has Molex style plugs to run dual ailerons.

The receivers below can be used with this connector. Please see the notes pertaining to each.
DelTang Rx34d Molex Pico Blade
Polarity: Plug and Play – no wire swapping required.
Power Supply: This receiver can operate on 3 – 6 volts. Check that the voltage the receiver is running at and the servo’s rated voltage range match.
The servos below can be connected to this Y-Connector. Please see the notes specific to each servo.
Servo Micro Black 2gram With JST SH Connector
Maximum Operating Voltage: 5 volts (use for ESC with BEC power to Rx)
Polarity: Negative and signal wire must be swapped on the servo plug
Servo Linear Origin Mi-LSM 1300S
Maximum Operating Voltage: 4.2 volts (Use 1S voltage to power Rx)
Polarity: Negative and signal wire must be swapped on the servo plug
Servo BlueArrow S02512
Maximum Operating Voltage: 6 volts (use for ESC with BEC power to Rx)
Polarity: Negative and signal wire must be swapped on the servo plug