Receiver MA-RX42-F1 FRSky D8 Brushed 5A ESC

Specifications:

This is the updated version MA-RX42-F1 receiver with V2.0 Firmware. It is compatible with FR-Sky D8 Protocol. This smaller size receiver weighs just 0.9 grams without the battery connector (1.45 grams with connector). It also features a 5 Amp onboard brushed ESC.

• Working Voltage:3.0~5.0V
• Built-in brushed ESC 5A/1S with Lock Starting function
• Supports brushless motors via the Ch1 Throttle port
• Enhanced binding functionality for FR-Sky D8 Protocol

Binding
The receiver will enter bind mode automatically 15 seconds after the battery is connected and the LED will blink rapidly. The receiver can then be bound according to your transmitters bind functionality.

Start Lock Function
This prevents the onboard brushed motor from starting accidently. When power is first supplied to the receiver, the throttle needs to be lowered to zero for 2 seconds before the motor arms.

Important Note About Channel Order
We have recently noted that some of these receivers are being shipped with the channel order set to TEAR in firmware instead of the standard AETR (Default FRSky order). If you find your throttle and aileron are swapped you can fix this in 2 ways.

1. Mixing – Go into your model settings and change the mixing to swap the Aileron and Throttle channels.
2. Preferred Method
   Before creating a new model go into your transmitter settings “Radio Setup” screen and toward the bottom of the menu change the “RX Channel Order” setting to read “TEAR”. This doesn’t affect any models you have already created. This setting just sets the default channel order for new models. Then create a new model and all should work okay. You can then change the radio setting back to AETR.